How to measure - Central Opening Pleated Screen

This screen can be fitted in 2 ways.

Reveal fitted

How to measure

We advise taking 3 measurements for both width (top, middle & bottom) and height (left, middle & right) to allow for any variations. In each case use the smallest measurements for your final width and height. We will make your screen to these sizes. Enter these measurements into the boxes to confirm your price. 

Your screen will be cut, so that when fitted the overall screen size will match your dimensions.

The width of the mesh 'stack' on each side of the screen will vary depending on the width of your door.  The top track is 40mm deep and the bottom track at 4mm deep adheres to the floor.

The two horizontal guides are screwed into the underside of the reveal and the floor.

The two vertical guides are screwed into the side walls of the reveal,

Face fitted

How to measure

The mesh 'stacks' are fitted to the side door frames. The width of these will vary depending on the width of your door.  The bottom and top track is 40mm deep

We will make your screen with the outer dimensions to be the measurements provided.

The dimensions in the table below provide the width of the mesh 'stack' i.e. the side channel, mesh and handle bar to either side when the screen is open: