How to measure - double roller door screens
This screen can be fitted in 2 ways. For each method of fixing we will show you:
- a visualisation drawing
- a how to measure drawing
Reveal fitted
Visualisation
How to measure
The
tw0 cassettes (each 51mm wide) are fitted into the top of the reveal and the floor using two
tabs and screws,
The two guides (both 40mm high) are screwed into to the underside of the reveal and the floor. For low thresholds, a 22mm bottom guide is available. as an option.
We advise taking 3 measurements for both width (top, middle & bottom) and height (left, middle & right) to allow for any variations. In each case use the smallest measurements for your final width and height. We will make your screen to these sizes.
Face fitted
Visualisation
How to measure
The
two cassettes are fitted to the side door frames using brackets fitted to the side of the cassette. The
total width of the cassette + brackets is 66mm.
The top and bottom guides (both 40mm high) slot into the ends of the cassettes and are fitted to the upper and lower door frames.. For low thresholds, a 22mm bottom guide is available. as an option.
We will make your screen with the maximum outer dimensions to be the measurements provided..