How to measure - window pleated screens
This screen can be fitted in 2 ways. For each method of fixing we will show you:
- a visualisation drawing
- a how to measure drawing
- options to choose from the dropdown menu
Reveal fitted
Visualisation
How to measure
.jpg)
The top channel is 25mm deep and is screw fixed to the top of the reveal (lintel).
The
two side channels are 40mm wide. They screw fix to the side walls of the reveal and sit on the sill.
The depth of the screen (front to back) is 22mm.
We advise taking 3 measurements for both width (top, middle & bottom) and height (left, middle & right) to allow for any variations. In each case take the smallest measurements for your final width and height. We will make your screen to these sizes.
Face fitted
Visualisation
How to measure
The top, bottom, and side channels are all 40mm wide.
Your screen will be fitted to the window frame around your window opening. We suggest screw fixing through the channels but you can potentially use a double sided glazing tape as an alternative.
The depth of the screen (front to back) is 22mm.
We advise taking 3 measurements for both width (top, middle & bottom) and height (left, middle & right) to allow for any variations. In each case take the smallest measurements for your final width and height. We will make your screen to these sizes.